Skip to Content

Program Portal
PG&E Whole House
Rebate Program


Questions?
Call (866) 970-7348


 
 
 
 
 

Save Energy or Water

4. Products That Save Energy or Water

These criteria used for defining green products was excerpted from "Building Materials: What Makes a Product Green?" as featured by Environmental Building News.


The ongoing environmental impacts that result from energy and water used in operating a building often far outweigh the impacts associated with building it. Many products are included in GreenSpec for these benefits. There are several quite distinct subcategories:

4a. Building components that reduce heating and cooling loads

Examples include structural insulated panels (SIPs), insulated concrete forms (ICFs), autoclaved aerated concrete (AAC) blocks, and high-performance windows and glazings. As these energy-saving products gain market acceptance, our threshold for inclusion in GreenSpec may become more stringent. For example, we may begin including only SIPs and ICFs with steady-state R-values above a certain threshold or with other environmental features, such as recycled-content foam insulation. Some products, such as insulation, clearly offer environmental benefits but are so common that they need other environmental features to qualify for GreenSpec.

In the case of windows, the base standard for energy performance of windows is an NFRC-rated unit U-factor of 0.25 or lower for at least one product in a listed product line. If the windows are made from an environmentally attractive material (e.g., high recycled content or superb durability), the energy standard is less stringent: U-factor of 0.30 or lower. If the frame material is nongreen, such as PVC (vinyl), the energy standard is more stringent: U-factor of 0.20 or lower. There are a few exceptions to these standards, such as high-recycled-content windows made for unheated buildings.

4b. Equipment that conserves energy and manages loads

With energy-consuming equipment, such as water heaters and refrigerators, we have good data on energy consumption and can set clear standards accordingly. In most product categories, e.g., refrigerators, dishwashers, and clothes washers, we set higher thresholds than Energy Star®: for example, exceeding those standards by 10% or 20%. With lighting and lighting control equipment, certain generic products qualify, such as compact fluorescent lamps and occupancy/daylighting controls, while in other categories only a subset of products qualify. (See table for GreenSpec standards for certain types of equipment.) In some cases, products that meet the energy efficiency requirements are excluded, because of evidence of poor performance or durability. Microturbines are included here because of the potential for cogeneration (combined heat and power) that they offer. Ice- or chilled-water thermal energy storage (TES) equipment is also included because it helps reduce peak loads, which in turn can reduce energy costs and lower the impact of electricity generation.

4c. Renewable energy and fuel cell equipment

Equipment and products that enable us to use renewable energy instead of fossil fuels and conventional electricity are highly beneficial from an environmental standpoint. Examples include solar water heaters, photovoltaic systems, and wind turbines. Fuel cells are also included here, even though fuel cells today nearly always use natural gas or another fossil fuel as the hydrogen source, they are considered green because emissions are lower than combustion-based equipment and because the use of fuel cells will help us eventually move beyond fossil fuel dependence.

4d. Fixtures and equipment that conserve water

All toilets and most showerheads today meet the federal water efficiency standards, but not all of these products perform satisfactorily. With toilets and showerheads we include products that meet the federal standards and have dependably good performance. We include in GreenSpec only toilets that offer at least 20% water savings, compared with the federal standard of 1.6 gallons per flush (gpf), and we have adopted the Maximum Performance (MaP) standard for the performance of most toilets, requiring a minimum rating of 65 grams of test media removal per liter of flush volume. Some other products, such as rainwater catchment systems, are also included.



BuildingGreen, Inc. is publisher of Environmental Building News, GreenSpec, EBN Archives, and Green Building Advisor.